Advertisement

Add Energy Saver to Power Options in Windows 10

In Windows 10, it possible to add the "Energy Saver" option to Power Options in the classic Control Panel. It will allow configuring the display brightness level and battery charge level at which Energy Saver is turned on.

The option Energy Saver was present in the Power Options applet of the Control Panel in Windows 7 and Windows 8. However, Microsoft decided to remove it in Windows 10. Instead, the company recommends users to refer to the Settings app as described in the following article: How to Enable Battery Saver in Windows 10. It is intended to save your PC's battery by limiting background app activity and putting your device hardware in power saving mode.

If you want to restore the option, follow the instructions below.

To add Energy Saver to Power Options in Windows 10, do the following.

  1. Open Registry Editor.
  2. Go to the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\DE830923-A562-41AF-A086-E3A2C6BAD2DA

    Tip: You can access any desired Registry key with one click.

  3. In the right pane, change the Attributes 32-bit DWORD value from 1 to 2. See the following screenshot:Add Energy Saver To Power Options
  4. Set the Attributes value to 2 under the next key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\DE830923-A562-41AF-A086-E3A2C6BAD2DA\13D09884-F74E-474A-A852-B6BDE8AD03A8

    Add Energy Saver To Power Options Windows 10

  5. Finally, set the Attributes value to 2 under the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\DE830923-A562-41AF-A086-E3A2C6BAD2DA\5C5BB349-AD29-4ee2-9D0B-2B25270F7A81

    Energy Saver To Power Options Windows 10

Once you make these changes, "Energy Saver" will appear in Power Options.

Tip: you can open advanced settings of a power plan directly in Windows 10.

Before:Power Options No Energy Saver

After:
Power Options With Energy Saver

To remove the option you added, set the data value of Attributes back to 1.

To save your time, you can download these ready-to-use Registry files:

Download Registry Files

That's it.

Support us

Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:

If you like this article, please share it using the buttons below. It won't take a lot from you, but it will help us grow. Thanks for your support!

Advertisment

Author: Sergey Tkachenko

Sergey Tkachenko is a software developer who started Winaero back in 2011. On this blog, Sergey is writing about everything connected to Microsoft, Windows and popular software. Follow him on Telegram, Twitter, and YouTube.

2 thoughts on “Add Energy Saver to Power Options in Windows 10”

Leave a Reply

Your email address will not be published.

css.php
Using Telegram? Subscribe to the blog channel!
Hello. Add your message here.