How to add Safe mode to the Boot menu in Windows 10 and Windows 8

With Windows 8, Microsoft made changes to the boot experience. The simple text-based boot loader is now hidden by default and its place, there is a touch friendly graphical user interface with icons and text. Windows 10 has this as well. Although it is functionally richer, the UI is also very cumbersome to navigate and requires many OS components to be loaded before you see the GUI boot menu. In comparison, the classic boot loader in Windows 7 was extremely fast and gave you all the troubleshooting and startup related options on a single screen. For example, if you need to boot into the Safe Mode of Windows, you have to load this graphical boot UI first and then choose Safe mode. Today, we will see how to add the Safe mode option directly to the new boot loader on the screen where you get the OS choices.


All we need to do is clone the current OS boot options and modify them to start the OS in Safe mode. This is very easy to do. We will use only the built-in bcdedit tool.

  1. Open an elevated command prompt.
  2. Type the following command:
    bcdedit /copy {current} /d "Windows 10 Safe Mode"

    It will produce the following output:
    windows 10 bcdedit copy OS guid
    This command clones the current OS boot options to a new boot entry named "Windows 10 Safe Mode".

  3. In the bcdedit output, note the {guid} value. Copy it and paste in the following command:
    bcdedit /set {guid} safeboot minimal

    Replace the guid with your actual guid value, e.g.:
    Windows 10 safe mode boot menu

  4. If you want to add Safe Mode with networking support, copy the current OS boot options once again:
    bcdedit /copy {current} /d "Windows 10 Safe Mode with Networking Support"

    It will also produce a new guid in the output.
    Now modify it as follows, use your networking support guid instead of the {guid} part:

    bcdedit /set {guid} safeboot network

    windows 10 networking support safe mode

  5. If you need to add the "Safe Mode (Command Prompt)" item, run the following commands:
    - Make a new boot record again:

    bcdedit /copy {current} /d "Windows 10 Safe Mode (Command Prompt)"

    Note the {guid} value in the output.
    - Modify it to run in Safe mode using the guid above:

    bcdedit /set {guid} safeboot minimal

    - Finally, make it use the command prompt instead of the Explorer shell:

    bcdedit /set {guid} safebootalternateshell yes

    Windows 10 safe mode command prompt

Now reboot your PC and test the new options available in the boot menu:
windows 10 safe mode boot menu options
That's it.

19 thoughts on “How to add Safe mode to the Boot menu in Windows 10 and Windows 8

  1. Shyam Reddy

    Excellent tip/guide! Quite useful again! Thanks Sergey! :)

    Like or Dislike: Thumb up 2 Thumb down 0

    Reply
    1. Sergey Tkachenko Post author

      You are welcome. Thank you for your kind words.

      Like or Dislike: Thumb up 0 Thumb down 0

      Reply
    2. Rob

      I will second that – great, detailed and useful post. Thanks, Sergey! :)

      Like or Dislike: Thumb up 0 Thumb down 0

      Reply
  2. throkr

    Excellent guide, as usual. Thanks, Sergey !
    No problem on my machines where I have more than 1 OS installed but I plan to do this also on a friend’s computer, so :

    1. Will the system show the options at boot even with 1 OS installed ?
    2. If, for some reason, he wants to revert to the default bootloader, how do I proceed ?

    Thanks for your advice ! :)

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
    1. Sergey Tkachenko Post author

      It will show anyway.
      You will deal with the default bootloander in any case. All you need to do to “revert” these changes is the following command:

      bcdedit /delete {GUID}

      Repeat the command above for all “safe mode” GUIDs you added.
      If you forgot them, just run bcdedit without parameters, it will show all GUIDs.

      Like or Dislike: Thumb up 3 Thumb down 0

      Reply
  3. throkr

    Perfect !
    Thank you very much. :)

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
    1. Sergey Tkachenko Post author

      You are welcome.

      Like or Dislike: Thumb up 0 Thumb down 0

      Reply
  4. Santos Martinez

    Hi, I did follow your guide but just one same GUI was generated through all steps. It’s that correct?

    Then, any option guide me to same Windows normal (regular) start, not “safe mode” or “promt mode” in any case.

    If I delete this (same for all options) GUI will have problems with Windows starter administrator option?

    Thanks.

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
    1. Sergey Tkachenko Post author

      Every bcdedit /copy command should produce its own guid. I didn’t understand what you wrote about normal/regular start, and what you are going to delete. Can you explain me it?

      Like or Dislike: Thumb up 0 Thumb down 0

      Reply
      1. Deep

        Sergey,

        I just reviewed my entries when I typed bcdedit and it looks like I got the same GUID every time as well. I did copy it all; if it would help you to review it, let me know and I would be happy to email it (the text file generated from the elevated prompt when I typed bcdedit, then copied it to notepad) to you. Again, thanks for your efforts. I haven’t rebooted to see if I get the options, but ask if having the same GUID will negatively affect the computer or cause problems. Please let me know.

        Like or Dislike: Thumb up 0 Thumb down 0

        Reply
        1. Sergey Tkachenko Post author

          Hi
          Send me the output to my email . You can find it here:
          https://winaero.com/blog/about-us/

          Like or Dislike: Thumb up 0 Thumb down 0

          Reply
      2. Skunk1966

        I’m having the same problem; only one GUID with every command. The bootmanager shows all different options but it doesn’t matter what option I choose; Windows will start in normal mode

        Like or Dislike: Thumb up 0 Thumb down 0

        Reply
      3. Skunk1966

        I’m having the same problem; only one GUID with every command. The bootmanager shows all different options but it doesn’t matter what option I choose; Windows will start in normal mode
        EDIT: the mistake was caused by me! Now I have all boot options working and changed the commands in such a way that the boot options are in my own language (Dutch) now

        Like or Dislike: Thumb up 0 Thumb down 0

        Reply
  5. Deep

    You are absolutely awesome. Your instructions are incredibly detailed and everything works great. Information like this and the info about how to stop data collecting are invaluable and I for one vote for Sergey for President of the Internet! Thank you very much!

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
  6. Vance

    Cool article Serge. It would be nicer if you added same step by step way to undo each commands made, maybe on another article, i mean it’s always cool if one knows how to undo what was done as it is learning after all not just tinkering with our pc’s.

    When I tried to undo them and entered bcdedit 5 columns came up, “Windows Boot Manager” on top followed by 4 “Windows Boot Loader”. All 5 columns have at least almost identical 2 guid-like values, on the right of the lines “default”, “resumeobject”, “displayorder”, “identifier”, “recoverysequence”, ect. Which of those values am I going to copy and paste to undo specific command we did above?
    May you kindly field on this. Thanks.

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
  7. Vance

    Hi again sir, please help, I accidentally clicked and booted into safe mode with command prompt. the command prompt appeared once, i closed it but only a black screen appears, nothing else, i shut down my pc and powered it on again but same only black screen and my mouse pointer. How can I go back to rebooting in normal boot?

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
  8. Sergio

    Merci Sergey

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
  9. Adam

    Does doing this allow you to skip Windows installing updates? Every time 8.1 tries to install them it hangs at 100%/30% and the only way to skip it is a system restore or refresh (Which means I have to reinstall Chrome) which takes forever. Getting to Safe Mode would be easy…except Windows decides it needs to install the updates first. It’s aggravating as hell.

    Like or Dislike: Thumb up 0 Thumb down 0

    Reply
  10. Roland S

    On this site, there is a very nice solution. I tried it with success :
    http://www.pcworld.com/article/2984712/windows/how-to-enter-windows-10s-safe-mode.html
    You’ll get the same option screen you used to have in win 7 with all boot menu options.
    You’ll need to make first a recovery drive usb key (everything will be deleted on this usb key!) to make the modification, to be done only once. Afterwards, to boot in safe mode, use the F8 key repeatedly, as you did in windows 7, during booting.

    Like or Dislike: Thumb up 1 Thumb down 0

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *