In Windows 10, a number of users are trying to install .NET Framework 3.5 and facing an issue. While installing .NET 3.5 using DISM, it produces an error 14003 and gives some Microsoft-Windows-NetFx3-OnDemand-Package error 0x800736b3. Here is what you can do to avoid it.
Error code 0x800736b3 indicates that the Component Store in Windows 10 is corrupted. It corresponds to the text message ERROR_SXS_ASSEMBLY_NOT_FOUND.
[==========================100.0%==========================]
An error occurred – Microsoft-Windows-NetFx3-OnDemand-Package Error: 0x800736b3Error: 14003
The referenced assembly is not installed on your system.
I noticed that most users who faced this issue tried to install .NET Framework 3.5 in Windows 10 using the following command:
dism /online /add-package /packagepath:D:\sources\sxs\microsoft-windows-netfx3-ondemand-package.cab
Here, D: is the drive letter of the Windows 10 setup media.
To resolve this issue, first try to install .NET Framework 3.5 as described in the following article: Offline install of .NET Framework 3.5 in Windows 10 using DISM.
In the mentioned article, the command is different.
If you still cannot install .NET framework 3.5 and get the same error, then it means you need to repair the component store.
Do the following:
- Open an elevated command prompt.
- Type the following command and hit the Enter key:
Dism /Online /Cleanup-Image /StartComponentCleanup
- Next, type the following command and hit the Enter key:
Dism /Online /Cleanup-Image /RestoreHealth
This should fix the issue and you should be able to install .NET Framework 3.5 in Windows 10.
Support us
Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:
It didn’t work.plz suggest another way solve it.
run powershell with adm.prv.
copy
microsoft-windows-netfx3-ondemand-package.cab
from windows installation media drive\sources\sxs to c: drive
run
dism /online /add-package /packagepath:c:microsoft-windows-netfx3-ondemand-package.cab
microsoft-windows-netfx3-ondemand-package.cab (64 bit is 70 MB )
inside dism online is not there
A minor adjjustment, the DISM line should read
dism /online /add-package /packagepath:C:\microsoft-windows-netfx3-ondemand-package.cab
That should work
Is there is any kind of software to enable netfx3 in window 10 without any error.
I also tried ur new method but again it show that error while opening package.
Tried this at first, did not work… then i was stock at restoring health in 20%… i reinstalled the windows 10, but not formatting everything, put the windows 10 files to drive D… run the batch file… it worked… :)
Not entirely sure about this, but make sure to disable your virus scanner. I was stuck on 20%, but after disabling the AV it continued. It seems the AV sometimes makes it impossible to access certain files.
I’ve try some trik to fix this error (0x800736b3) on windows10, but I cant fix it.
maybe any trik I ca try?
“The referenced assembly is not installed on your system.”
What exactly is referenced assembly?
I tried VC++ 2005 till 2013 both 32bit/64bit… still error remains the same..
Dism /Online /Cleanup-Image /RestoreHealth (it kept struck)
startcomponentcleanup) command works 100% but the next (Restorehealth) command ends with an error! plz any other solution??
C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the “Source” option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
still not working…
got message “the referrenced is no assembly on your computer”
any one can help me?
I recently installed win 10 from a bootable flash drive over my win 7 OS. I can’t seem to install net framework. I keep getting the error reference assembly not installed…and I tried all the above steps mentioned but still can’t get working. I want to use my ps3 controller on my pc. please help!
I tried the offline method but it says,
Error:14003
The referenced assembly is not installed on your system.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Then I tried the Component Cleanup method:
This:
Dism /Online /Cleanup-Image /StartComponentCleanup
completed successfully.
But
Dism /Online /Cleanup-Image /RestoreHealth
after taking a long time, gave
Error: 0x800f081f
The source files could not be found.
Use the “Source” option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
I have also this type of problem. Whenever u get solution of this problem ..so plz tell me
not working
n: 10.0.10240.16384
[==========================100.0%==========================]
The operation completed successfully.
C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f0907
DISM failed. No operation was performed.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
C:\Windows\system32>dism /online /add-package /packagepath:G:\sources\sxs\microsoft-windows-netfx3-ondemand-package.cab
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Processing 1 of 1 – Adding package Microsoft-Windows-NetFx3-OnDemand-Package~31bf3856ad364e35~amd64~~10.0.10240.16384
[==========================100.0%==========================]
An error occurred – Microsoft-Windows-NetFx3-OnDemand-Package Error: 0x800736b3
Error: 14003
The referenced assembly is not installed on your system.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
You need to fix your component store.
See Fix .NET Framework install error 0x800736b3
Give that guy a cooky, I had a problem with directx though…
When i copy this command in cmd and run. Its give the error 0x800f081e. So what to do now
Error 0x800F081E is CBS_E_NOT_APPLICABLE which means that the update can’t be installed on the current system. This happens when a requirement is missing or the installed files have higher file version.
The suggestion by Baki to copy the microsoft-windows-netfx3-ondemand-package.cab into C:
and use DISM was didnt work for me, but, I adjusted the command to
dism /online /add-package /packagepath:C:\microsoft-windows-netfx3-ondemand-package.cab
This worked
Nice article thanks
My copy of Windows 10 was a free upgrade from windows 7. How do I install .Net framework 3.5 without a physical copy of Windows 10?
You need any ISO image. Otherwise install it from the Internet.