Disable These Files Might Be Harmful to Your Computer Warning

Disable These Files Might Be Harmful to Your Computer Warning in Windows 10

If you connect a network share, i.e. mount a network drive by IP address of the server, Windows 10 displays a warning message These Files Might Be Harmful to Your Computer when you are opening files stored there. Here's how to get rid of it.

Windows 10 These Files Might Be Harmful To Your Computer

The warning message usually appears when you copy from the mapped network drive to your local drive when a remote location is mapped by an IP address. If you click on the OK button, the dialog will be closed and your files will be copied. This can be very annoying when you need to copy many files.

Luckily, there are network options you can change so Windows 10 will consider the network location as a safe date source and destination.

To Disable These Files Might Be Harmful to Your Computer Message,

  1. Open the classic Control Panel app.
  2. Navigate to Control Panel > Network and Internet > Internet Options.Windows 10 Control Panel Network Options
  3. Switch to the Security tab in the Internet Properties dialog.Windows 10 Internet Properties Security Tab
  4. Click on the Local Intranet icon to select it.Windows 10 Internet Properties Security Tab Local Intranet Icon
  5. Now, click on the Sites button.Windows 10 Internet Properties Security Tab Sites Button
  6. In the next dialog titled Local Intranet, click on the Advanced button.Windows 10 Local Intranet Advanced Button
  7. In the next dialog type the IP address of the mapped network location into the Add this website to the zone box, and click on Add.Windows 10 Local Intranet Add IP Address
  8. Click on Close, and close other dialog boxes.Windows 10 Local Intranet Add IP Address 2

This makes Windows 10 trust the specified network computer on your local network, so it won't display the annoying warning dialog every time you copy or move files from there.

It is worth mentioning that instead of the exact IP address of a remote PC, you can specify a wildcard, like 192.168.2.*. In this case Windows 10 will trust to all PCs with IP addresses from 192.168.2.1 to 192.168.2.255.

Note: The same method works in Windows 8, Windows 8.1 and Windows 7.

Leave a Reply

Your email address will not be published. Required fields are marked *