Advertisement

Change WiFi network priority in Windows 10

In Windows 10, the Settings app does not provide the user a simple way to change the WiFi connection priority. If you are coming from Windows 7, you are probably used to easily setting the priority of wireless networks using the special applet in the Control Panel. In Windows 10, that applet is missing in the classic Control Panel, and Settings does not offer any alternative. Let's see how to change WiFi network priority in Windows 10.

In Windows 10, the only way to change a WiFi network priority without using third party tools is the console tool netsh. Using netsh, you can change the connection order for all registered wireless networks. Here is how it can be done.

Change a WiFi network priority in Windows 10
To change a WiFi network priority in Windows 10, do the following.

  1. Open an elevated command prompt.
  2. Type or copy-paste the following command:
    netsh wlan show profiles

    This will show you all wireless network profiles stored on your PC. The command shows profiles according to their current priority set by the operating system.wifi-profiles

  3. To change the order in which your Windows 10 will connect to them, type the following:
    netsh wlan set profileorder name="NETWORK NAME" interface="Wi-Fi" priority=1
    netsh wlan set profileorder name="OTHER NETWORK NAME" interface="Wi-Fi" priority=2

    And so on. Use the actual network names that you get in the previous step.wifi-change-priority-in-windows-10

     

    Now, if you run netsh wlan show profiles again, you will see that the list is re-ordered.

Tip: if you need to set Windows 10 to always prefer a specific network profile, set its priority to 1 and do not change other profile priorities.
That's it.

Support us

Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:

If you like this article, please share it using the buttons below. It won't take a lot from you, but it will help us grow. Thanks for your support!

Advertisеment

Author: Sergey Tkachenko

Sergey Tkachenko is a software developer who started Winaero back in 2011. On this blog, Sergey is writing about everything connected to Microsoft, Windows and popular software. Follow him on Telegram, Twitter, and YouTube.

2 thoughts on “Change WiFi network priority in Windows 10”

  1. When I entered the command, I got the following error:

    C:\WINDOWS\system32>netsh wlan show profiles
    The Wireless AutoConfig Service (wlansvc) is not running.

    I started wlansvc ( it was set to “manual” not disabled, so why didn’t it just start?) and tried it again, but then got:

    C:\WINDOWS\system32>netsh wlan show profiles
    There is no wireless interface on the system.

    We do have wireless, so I don’t understand the error? Can you help?

    Thanks for all your great articles!

Leave a Reply

Your email address will not be published.

css.php
Using Telegram? Subscribe to the blog channel!
Hello. Add your message here.